Making Solar Panels Last
- Posted by adminsolar
- On August 30, 2018
- 0 Comments
When one makes the switch over to solar power in Frederick, one of the most common questions they have has to do with making the panels last as long as possible. This is understandable, because getting a sun-powered system in Frederick can cost quite a few dollars, which may be enough of a motivator to want to keep everything in great working order for as long as possible.
Clean Them
These panels do a wonderful job. Such a wonderful job, in fact, that one may forget that they’re there. However, one should remember that the glass portion of the panels is the one that stays in contact with the light, and which needs to be as clean as possible in order to do so. Indeed, if there are particles of dust or of debris covering them up, they will be doing a job that’s a whole lot less efficient than one may hope for. As such, it’s important to try one’s best to keep them squeaky clean. How often should one wash their panels depends on where they live. Indeed, if they live in a dessert, or an area with heavy construction, a weekly cleaning may be in order.
Best Cleaning Procedures
The easiest way is to take a hose, point it at them, and let the water run. However, one may want to give them a better cleaning every once in a while, in which case they should remember to use a mild, biodegradable soap, with a soft cloth. That’s because the whole point is to get them clean without scratching or otherwise harming the integrity of the glass. If one want to get up on the roof, they should do so with extreme care, since the surface will be extremely slippery, especially when the area becomes wet.
Out of the Shade
The whole reason one gets a solar power system in Frederick is to that they will be able to convert energy from the sun into something they can use. Of course, if they put the panels in the shade, the whole process will be impaired. Not only this, but essentially, the shaded panel will go through all the stages the other panels will, including getting old and not performing as well, without it being cost effective in any way.
Monitor
This doesn’t require the individual to do anything in particular, but they should be able to look at them every now and then. They should especially care for the inverter display, checking to see if the green light is on. If, for instance, it’s flashing, it’s not a good sign, and the manual should be checked.
0 Comments